Kyocera AG1009 Manual Del Usuario página 9

ABLE PARTS (BLADE, BIT, SANDING PAPER ETC.), LUBRI-
CATING OR WORKING ON THE UNIT.
ANTIDUST FILTER CLEANING (Fig.7)
After use, remove the 2 antidust filters (19) and clean any dust or
other debris that has accumulated on the filters.
If the filters continued to be used while clogged with dust, etc., it
will prevent cooling air from flowing, which could cause the motor
to overheat.
(Removal)
Remove antidust filters by pulling upward in the direction of
arrow while pushing the antidust filter hook (A) in the direction
of arrow .
(Attachment)
Align and insert antidust filter tab (B) into groove (C) on the
device and push hook (A) to attach.
WARNING!
To ensure safety and reliability, all repairs should be per-
formed by an AUTHORIZED SERVICE CENTER or other
QUALIFIED SERVICE ORGANIZATION.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
" WARNING Always wear dust mask, ear protection
and eye protection "
" WARNING To reduce the risk of injury, user must
read instruction manual "
" Class II construction tool in which protection against
electric shock does not rely on basic insulation only, but
in which additional safety precaution, such as double
insulation or reinforced insulation, are provided "
- 8 -