Descargar Imprimir esta página

Renfert Waxlectric light I Manual De Instrucciones página 19

Ocultar thumbs Ver también para Waxlectric light I:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 46
► The product continues to be employed, despite obvious safety faults or damage;
► The product is subjected to mechanical impacts or is dropped.
3
Product Description
3.1
General Description
Please read the following operating instructions carefully and observe the information they con-
tain in order to ensure a long and trouble-free service life.
• An external transformer supplies the wax knife with 12 V power� As a user, this increases your safety
during your daily work with the Waxlectric light�
• The defining feature of the Waxlectric light is its heater which is located directly in the modelling tips.
This allows the tips to react more rapidly to temperature changes� The knife's thermal dynamics are
markedly improved by the highly heat conductive special alloy�
• The electric wax knife is extremely service friendly. The modelling tip surfaces are not finished and can
therefore be easily reground as required� Should the heater develop a fault, only the tip need be re-
placed�
The wax knife no. 2155-0112, Large Wax Knife (refer to "Accessories") may NOT be reground or
re-sharpened.
3.2
Components and Functional Elements
A ON / OFF switch
B LED indicator
C Temperature adjustment, left channel
D Temperature adjustment, right channel
(Waxlectric light II only).
A
F
3.3
Standard Delivery
1 Control unit
1 Handpiece (or 2 handpieces with the Waxlectric light II)
1 Modelling insert, No. 2155-0102 (for Waxlectric light I), or 2 inserts, No. 2155-0101 + 2155-0103
(for Waxlectric light II)
1 Transformer
1 Instruction manual
C
B
D
E
G
- 5 -
E Control unit
F
Handpiece
G Handpiece (Waxlectric light II only).
H Transformer
EN
H

Publicidad

loading

Este manual también es adecuado para:

Waxlectric light ii