Publicidad
Idiomas disponibles
Idiomas disponibles
1 - Make sure the juicer is unplugged before starting to clean it.
2 - Lift the lid and take out the cone, filter, container and the drive insert (14).
3 - To remove the lid, push the lid catch (7) upwards and slide the complete lid downwards so the
axle (8) is freed (PHOTO 1).
4 - Remove the pusher from the lid(10) by gently pulling on it (PHOTO 2).
5 - Clean all the parts removed with soap and water. Do not use abrasive products for cleaning.
All the removable parts of the juicer are dishwasher safe. Dry off all the pieces before
re-assembling them.
6 - The base of the juicer cannot be submerged in water. Use a damp cloth to clean the base of
the motor. Dry the base off to store it.
7 - Put the lid on the base of the juicer, following the instructions below:
a) Assemble the lid pusher. Position the pusher in its housing on the lid and push it
gently into position (PHOTO 3).
b) Lift the lid catch until it is flush with the lid. Insert the lid axle into the axle support
(9) from below (PHOTO 4).
CLEANING / MAINTENANCE
1
2
3
4
41
Publicidad
