Safety Regulations; Technical Data - EINHELL Power-X-Twincharger 3A Bivolt Manual De Instrucciones

Important!
When using the equipment, a number of safety
precautions must be observed to avoid injuries
and damage. Please read the complete operating
instructions and safety information with due care.
Keep these operating instructions in a safe place
so that the information is available at all times. If
you give the equipment to any other person, hand
over these operating instructions and the safety
information as well. We cannot accept any liabi-
lity for damage or accidents which arise due to
failure to follow these instructions and the safety
information.

1. Safety regulations

The corresponding safety information can be
found in the enclosed booklet.
Caution!
Read all the safety information and instruc-
tions. Any errors made in following the safety
information and instructions may result in an elec-
tric shock, fi re and/or serious injury.
Keep all the safety information and instruc-
tions in a safe place for future use.
This equipment can be used by children of 8 ye-
ars and older and by people with limited physical,
sensory or mental capacities or those with no ex-
perience and knowledge if they are supervised or
have received instruction in how to use the equip-
ment safely and understand the dangers which
result from such use. Children are not allowed
to play with the equipment. Unless supervised,
children are not allowed to clean the equipment
and carry out user-level maintenance work.
Replacing the power cable
If the power cable for this equipment is damaged,
it must be replaced by the manufacturer or its
after-sales service or by similarly trained person-
nel to avoid danger.
a) The charging unit is not allowed to be used
for non-rechargeable, normal batteries.
b) Suffi cient ventilation is required.
c) The current and voltage information on the
battery pack must be the same as that on the
charging unit.
d) Do not expose the charging unit to splashwa-
ter or rain.
e) The charging unit must be disconnected
from the socket outlet before the cordless
Anl_SA_P_X_Twincharger_3A_Biovolt.indb 14 Anl_SA_P_X_Twincharger_3A_Biovolt.indb 14
GB
screwdriver is inserted into or removed from
the charging station.
f) Do not throw old or damaged batteries into
water or fi re. Follow the environmental protec-
tion directives.
g) A defective or no longer chargeable battery
must be treated as special waste. Dispose of
it at a special collection point. Do not dispose
of it with your normal household waste or th-
row it into water or fi re.
h) Place the charging unit away from all sources
of heat.
i) To reduce the risk of electric shock, pull the
power plug out of the socket outlet by the plug
itself and not by the cable when you want to
disconnect the charging unit from the power
supply.
j) Do not take the charging unit apart. Take it
to an authorized repair center if servicing or
repairs are needed. Incorrect assembly can
result in an electric shock and even death or
fi re.
k) Children must always be supervised in order
to ensure that they do not play with the equip-
ment.
2. Layout (Fig. 1)
1. Charging unit
2. Charging cable

3. Technical data

Charging unit:
Input: ....................... 100-240V~50-60Hz, 150 W
Output1: ................................... 18 Vcc, 3000mA
Output2: ................................... 18 Vcc, 3000mA
Important.
The charging unit is allowed to be used only for
the lithium-ion batteries of the Power-X-Change
series!
Power-X-Change
•
18 V, 1,5 Ah, 5 Li-Ion Cells
•
18 V, 2,0 Ah, 5 Li-Ion Cells
•
18 V, 3,0 Ah, 10 Li-Ion Cells
•
18 V, 4,0 Ah, 10 Li-Ion Cells
•
18 V, 5,2 Ah, 10 Li-Ion Cells
- 14 -
08.08.2019 08:43:48 08.08.2019 08:43:48