Publicidad
Idiomas disponibles
Idiomas disponibles
PREPARATION
Before beginning to assemble or install lighting fixture, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is missing or damaged, do
not attempt to assemble, install or operate the product.
Estimated Assembly Time: 30 minutes
Tools Required for Assembly (not included): Flathead Screwdriver, Phillips Screwdriver, Pliers,
Electrical Tape, Wire Cutters, Safety Glasses, Ladder, Wire Stripper, 1/2 in. Wrench, 1/2 in. Ring
Spanner, Electric Drill.
ASSEMBLY INSTRUCTIONS
1. Secure the caps (FF) to the fixtures (F).
Hardware Used
Cap
FF
2. Remove the preassembled screws with a Phillips
screwdriver (not included) to detach the finial (E) from the top
pole (A) and place them in a safe location.
3. Remove the preassembled nut and washer from each fixture
(F). Save for later use.
x 3
4
1
FF
2
E
3
F
A
Publicidad
