Husky HOTC5623BB2S Guía De Uso Y Cuidado página 6

Assembly
1
Attaching the side handle
□ Attach the side handle (D) to the rolling cabinet (E)
using four bolts (AA).
NOTE: The holes in the cabinet are tapped and do not
require nuts.
3
Placing the chest
NOTE: Two people may be required to complete
this step.
□ Place the top chest (B) on top of the rolling cabinet (E).
□
D
E
B
E
2
Installing the casters
□
Ensure all cabinet drawers are securely locked into
place using the key lock on the rolling cabinet (E).
□ Lay the rolling cabinet (E) on its back. Use the
packaging material to protect the finish.
□ Mount the four swivel casters with brake (F) to the
rolling cabinet (E) using four bolts (BB) per caster.
The s wivel casters with brake (F) should be installed
on e ach end at the cabinet .
□ Mount the two regular casters (H) to the center of the
rolling cabinet (E) using four bolts (BB) per caster.
□ Tighten all bolts with a wrench.
□ Return the rolling cabinet (E) to its upright position.
AA
BB
4
Installing the brackets
NOTE: The holes in the cabinet are tapped and do not
require nuts.
□ Attach the brackets (C) to the back of the
□ Tighten all screws securely with a screwdriver.
CC
6
CAUTION: Do not over tighten the screws.
H
□
product to secure the top chest (B) to the rolling
cabinet (E). Place the brackets over the holes and
secure with four screws (CC) per bracket.
C
E
F
B
E