Common Tools Needed; Installation Procedure - Toto TS101S Manual De Instrucciones

Pipe Tape
INSTALLATION PROCEDURE - TS101R
1) Wall outlet:
Install a 1/2" NPT male nipple (not
included) 1/2" beyond the finished wall
surface.
NO TE: The hole for the nipple should
not be larger than 1" (25mm) in
diameter.
Seal wall opening around 1/2" nipple
with caulk.
Wrap the threads of the nipple with
pipe tape.
Thread the wall outlet on by hand until
the outlet points straight down and has
made contact with the wall.
A screwdriver may be inserted into the
outlet hole to provide extra leverage
while tightening.

COMMON TOOLS NEEDED

Adjustable
Wrench
Drill 1/4"or 3/32"
Drill Bit
Wall Surface
Nipple 1/2" NPT
Wall Outlet
3
Screwdriver
Finished
1/2" [13mm]
Pipe Tape