Senix CHX2 Manual Del Operador página 7

KNOW YOUR UNIT
Model: CHX2
Use this charger for X2 battery pack only.
1
2
3 Electrical contacts
4
5 Wall mounting hole
SPECIFICATIONS*
Model
Rated Input Voltage 120V
Input frequency
Rated Input Power
Compatible With
Battery
Input Frequency
Output Voltage
Output Current
Weight
EN - 6
Power cord
Lower cover
Upper cover
CHX2
50-60Hz
50W
Model: B25X2
20 Max Lithium Ion
2.5Ah, 45Wh
Model: B50X2
20 Max Lithium Ion
5.0Ah, 90Wh
50Hz/60Hz
21V. d.c.
2A
0.75 lbs
OPERATION
WARNING:
Do not use the charger outdoors
or expose it to wet or damp
conditions.Water entering the
charger will increase the risk of
electric shock.
Explosive gases. Prevent Flames
and sparkles. Provide adequate
ventilation during charging.
HOW TO USE THE CHARGER
There are two positions can operate the
charger:
1) Horizontal :Put the charger on a table
horizontally and make it stabilize.
2) Vertical :Install two nails on a wall
vertically , put the charger on the two
nails fixedly.
NOTE:
The charger has hanging hols for
convenient storage.Install screws in the
wall 2 inches (50.8 mm) apart.Use screws
sufficiently strong to hold the combined
weight of the charger.
HOW TO CHARGE THE BATTERY
PACK
WARNING:
This Lithium-Ion battery pack is
shipped partially charged. Fully
charge the battery pack before
using it for the first time.
Charge the Lithium-Ion battery pack only
with the correct charger.
Connect the charger to a power supply, the
light indicator of the charger turns red.
WWW.SENIXTOOLS.COM