MACHEREY-NAGEL QUANTOFIX Relax Manual Del Usuario página 83

15.3 How to run a control strip measurement
NOTICE
Do not touch the test fields of the control strip with your fingers.
The check mode for control strips allows you to check the correct functioning of the instrument
using special color control strips. You can order these control strips from MACHEREY‑NAGEL.
Choose the entry "Control strip" in the service menu. The instrument asks for insertion of the
colored control strip.
Display 22: Control strip
The measurement of the control strip starts automatically as soon as the strip is placed on the
sled, if the autostart is activated. Once the measurement has been completed, the measured
values are immediately displayed and printed. The result of the measurement is not stored.
The values are so called remission values for the pre‑colored test pads on the control strip.
These values have to be compared to a set of standard values from the control strip package
instructions.
For additional information on the control strips or in case the values do not fit the expected value
ranges in the control sheet, please consult the package insert, or contact MACHEREY‑NAGEL
directly.
Manual QUANTOFIX Relax EN, V2.00 / 02.22
® 83