Horizon Global 76928 Instrucciones De Instalación página 10

9. Trim fascia –Locate the center of the fascia. Using a tape measure, marker, and utility knife, cut a notch in the bottom of fascia approximately 8.75'' wide by 4.25"
tall. See Figure 4. Note: Be sure area is clear of all electrical wiring before trimming.
10. Reinstall fascia/exhaust/taillights – Reconnect all wiring and reinstall the fascia using original hardware removed in step 2. Then, reinstall taillights, taillight covers
using original fasteners.
©2022 Horizon Global Americas Inc. - Printed in Mexico
Figure 4
8.75"
L C
Area to trim
Sheet 10 of 30
4.25"
76928NP 8/15/22 Rev. A