Descargar Imprimir esta página

B&G electronics PW-100 Manual De Instalación Y Funcionamiento página 4

Ocultar thumbs Ver también para PW-100:

Publicidad

Idiomas disponibles

Idiomas disponibles

PW-100 v5
PW-100 v5
Setting the volume of the internal speakers, "internal volume"
1. While INTER is on, press and hold
2. While INTER is held, press WAIL to
INTER.
increase volume.
Setting the volume of the external loudspeaker, "external volume"
1. Press and hold PTT.
2. While PTT is held, press WAIL to
increase volume.
ENERGY SAVING FEATURES (Automatic Shut Down, ASD)
Partial Shut Down (PSD)
If the incoming voltage is below 12.6VDC, after 20 seconds of inactivity the equipment
activates PSD mode. This change is indicated by the turning off the keyboard's backlights.
While on PSD mode, upon pressing any key the respective function will execute normally
and the equipment will return to normal energy consumption mode.
Total Shut Down (TSD)
The equipment constantly tracks the incoming voltage status. If the incoming voltage
goes below 12VDC, the equipment will automatically shut down any function and
auxiliary load. While on TSD, upon pressing any key the backlights will blink 3 times and
the function controlled by the pressed key will not execute.
Once the equipment detects that the incoming voltage exceeds 12.5VDC again, the
equipment will return to its normal operation.
TECHNICAL SPECIFICATIONS
Electronic Unit
Loudspeaker
DIMENSIONS
Digital Keyboard
Internal Speakers
INPUT VOLTAGE
12 - 14.9 VDC
INPUT CURRENT
12 Amps @ 13.6 VDC (100W Loudspeaker)
STAND BY CURRENT
<25 mA
AUDIO FREQUENCY
330Hz - 5600 kHz
OUTPUT POWER
93W RMS - 8 Ohm
SIREN FREQUENCY
440 - 1750 Hz
If voltage drops below 12V for 5 seconds or longer, the equipment will cease to work and
LOW VOLTAGE SHUTDOWN
resume operation when system voltage exceeds 12.5V
B&G ELECTRONICS
ONE YEAR LIMITED WARRANTY
BYG Electrónica S.A.S. guarantees that this product leaves the factory free from defects related to materials and
manufacturing. If for any reason a failure related to materials and manufacturing were to occur during the period
of one year after the date of purchase, BYG Electrónica S.A.S. would repair or replace the failing equipment free
of charge.
This warranty shall be voided if the product is modifi ed, tampered with, misused, or subjected to abnormal working
conditions. This warranty does not cover physical damage to the product surface. This warranty does not apply
when the malfunction results from the use of this product in conjunction with accessories, other products, or
peripheral equipment not designed by BYG Electrónica S.A.S.
All manuals and user guides at all-guides.com
3. While INTER is held, press HORN to
decrease volume.
3. While PTT is held, press HORN to
decrease volume.
3.7 H x 10.9 W x 19.8 D cm
1.5''H x 4.3''W x 7.8''D
13.3 H x 20.4 W x 15.5 D cm
5.2''H x 8.0''W x 6.1''D
2.5 H x 0.7 W x 5.4 D cm
1.0''H x 0.3''W x 2.1''D
8.0 H x 5.6 W x 9.5 D cm
3.2''H x 2.2''W x 3.7''D
6
6
PW-100
MANUAL DE INSTALACIÓN Y OPERACIÓN
FAVOR LEER ESTE MANUAL ANTES DE USAR EL EQUIPO
v5.0
Español
ES 1.0

Publicidad

loading