Publicidad
R-26PF
NO RECEIVER NEEDED
The Klipsch R-26PF internal amplifier eliminates the need for an expensive,
complicated, external receiver.
REFERENCE ACOUSTICS
High Efficiency/Low Distortion, Wide Dynamic Range, Flat Frequency
Response and Controlled Directivity are Klipsch's acoustic principles. These
speakers embrace those ideals to deliver all the power, detail and emotion
you would expect from a Klipsch Reference loudspeaker, no bullshit.
SIMPLE SETUP
With a wide range of digital, analog and wireless inputs, the R-26PF allows
you to hook up any audio source quickly and easily.
OPTICAL DIGITAL AUDIO
Don't want a soundbar? Hook up your TV or other digital source with the
included optical cable to enjoy big sound in your living room.
TURNTABLE READY
The built-in phono pre-amp lets you enjoy your favorite records without the
need for additional electronics. Simply hook up your turntable and listen.
BLUETOOTH
WIRELESS TECHNOLOGY
®
Works great with all Bluetooth-enabled smartphones, tablets and
computers allowing you to play music directly from your device.
HIGH EFFICIENCY AMPLIFICATION WITH DIGITAL CROSSOVER
The R-26PF floorstanding speakers incorporate bi-amplified ultra low-noise
amplifiers custom-designed to maximize system performance. The digital
equalizer and crossover allow our engineers to extract every ounce of
performance without distortion.
SUBWOOFER OUTPUT WITH BASS MANAGEMENT
Want more bass? Use the subwoofer output to connect any powered
subwoofer. Enable the subwoofer output's bass management feature to
perfectly blend your speaker with your subwoofer.
REMOTE CONTROL
An easy-to-use wireless remote control included.
EASY TO READ LED DISPLAY
LED array clearly shows the active input. Don't want to see the lights?
Simply press the LED button on the remote to turn off the front facing LEDs
TURNTABLE READY
WIRELESS TECHNOLOGY
PC READY
S P E C I F I C AT I O N S
SYSTEM DESCRIPTION
Powered Floorstanding Speakers (pair)
FREQUENCY RESPONSE
38Hz - 20kHz
MAX OUTPUT
114dB @ 1M
260W Total System Power (520W Peak) Bi-Amplified
TOTAL SYSTEM POWER
Tweeter: 20W per channel cont. @ <1% THD+N
Woofers: 110W per channel cont. @ <1% THD+N
1" (2.54cm) Aluminum diaphragm tweeter mated to
HIGH FREQUENCY DRIVER
90° x 90° square Tractrix
LOW FREQUENCY DRIVER
Dual 6.5" (10.2cm) copper spun magnetically shielded IMG woofer
CROSSOVER FREQUENCY
1700 Hz (active/DSP)
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Bass-reflex via front-firing port
• Bluetooth® wireless technology
• Phono/Line analog (with switch and ground screw
terminal)
INPUTS
• 3.5mm analog mini jack
• USB digital
• Optical digital
OUTPUTS
Single RCA line level output for connection to subwoofer
HEIGHT, WIDTH, DEPTH
39" (99.1cm), 7.8" (19.8cm), 13.5" (34.5cm)
WEIGHT
41.9lbs (19.02kg)
FINISH
Brushed Black Polymer Veneer
100V-120V / 220-240V selectable 50/60Hz internal power supply
VOLTAGE
with region specific power cord
• Remote Control (with 2 x AAA batteries)
• Magnetic grille
• 5M speaker wire with 4-wire connector
INCLUDED ACCESSORIES
• 1.8M power cord (region specific)
• 2M 3.5mm aux cable
• 3M Optical cable
BUILT FROM
2017
3502 WOODVIEW TRACE INDIANAPOLIS, IN 46268 | KLIPSCH.COM
All specifications are subject to change without notice. ©2015 Klipsch Group, Inc. Klipsch, Keepers of the Sound and Tractrix are registered trademarks of
Klipsch Group, Inc. a wholly-owned subsidiary of Voxx International Corporation. The Bluetooth
BLUETOOTH
®
NO RECEIVER NEEDED
®
Horn
®
word mark and logos are registered trademarks owned
by Bluetooth Sig, Inc. and any use of such marks by Klipsch Group, Inc. is under license.
TV READY
SIMPLE SETUP
Publicidad
