KLASS Fan SIROCCO Manual De Instrucciones página 9

7
Unscrew the two top canopy fixing screws
halfway attached at the bottom of the
mounting bracket.
Slide the top canopy up the downrod onto the
mounting bracket. Turn the canopy until fixing
screws lock into position and then fasten the
screws.
8
Unscrew 3 screws from LED plate,
Unplug the wire connectors, take out
LED plate.
9
Unscrew 3 screws from Light kit,
take out Light kit.
7
Motor assembly
Light kit
Connector
LED plate