PROUSER IBC15000B Modo De Empleo página 13

WARNING! Do not open or disassemble the device. Attempting to service the unit
yourself may cause the risk of electrical shock or fire. Please follow the safety
instructions when working on the device.
In a few cases , the charging process will finish very quickly, but the battery is not fully charged
or does not deliver the desired voltage or power. The reason for this case could be that the
battery is broken and needs to be replaced. If the device doesn't work at all, an internal fuse
might be blown. This happens always for a reason. Do not try to replace internal fuses yourself.
The device has to be checked by the manufacturer or by an authorized service.
ERROR DIAGNOSTICS
Error
Standard
Charging Mode
Recovery Mode
Battery capacity is too high for the selected mode. Verify the battery capacity and charge mode.
Battery voltage is too high or too low for the selected mode. Verify the battery voltage and charge mode.
Flashing
TROUBLESHOOTING
Reason/Solution
The battery is not accepting a charge. Change charge mode to Recovery Mode.
The battery cannot be recovered.
Reverse polarity. Reverse the battery connections.
13