keeps a voltage such to allow operation to the microcontroller.
The replacement of batteries must take place within maximum time of one minute in
conditions of flashing display.
Beyond this time, date and time will be lost and must be reset upon next activation.
However, the executed programs will remain memorized.
The use of strictly alkaline batteries is recommended.
Attention
when the battery is reinserted, the programmable thermostat does not restart
operation immediately; a period of time varying between 5 and 10 seconds must
be waited, during which the internal voltage regains normal operation values.
If the flat or nearly flat battery is removed and put back again, the waiting time
could be much longer.
Compliance with Community Directives 1999/5/CE (R&TTE)
2004/108/EC (Electromagnetic compatibility)
is declared with reference to the following harmonized standards:
ETSI EN 300 220-1
ETSI EN 300 220-2
ETSI EN 301 489-1
ETSI EN 301 489-3
REFERENCE STANDARDS
- 58 -
ORUS RF Programmable Thermostat User Manual