Masunt 1121 Instrucciones De Operación página 7

Congratulations on purchasing a new product from the masunt
range of key safes.
The safe in front of you is equipped with electronics for using
MIFARE Classic™ media.
Opening the safe
Use the enclosed master card to open and program the safe.
To do this, hold the master card against the black sensor. Once the
card has been read successfully, the blue LED lights up and the elec-
tronic lock makes a whirring noise. Then, to open the safe, turn the
handle with the masunt logo to the right to a horizontal position. The
mechanism will automatically lock again after 3 seconds. A valid card
must be presented again to open the safe.
If an invalid card is used three times in a row, the sensor will lock for
ten seconds.
To lock the safe again, close the door and turn the handle back to its
vertical position.
Cards
Master card
Opens the lock
ƒ
Required for programming
ƒ
Important! Please keep the master card in a safe place, since it
is required for all programming.
User card
Opens the lock
ƒ
Up to 50 different user cards can be programmed into the lock.
2 2