Publicidad
Idiomas disponibles
Idiomas disponibles
Instructions for use
Note: In addition to the RFID sensor, the lock is also equipped
with a # key. The # key is hidden behind the handle in the locked
position. The safe lock must be opened to use the # key.
Blue LED = card accepted
Adding / deleting a user card
1.
Hold the master card against the black RFID sensor.
2.
Turn the locking latch to the right to release the # key.
3.
Press the # key immediately briefly. Please wait. The blue LED
lights up continuously after 2 seconds.
4.
Hold an unregistered card once briefly against the sensor. The
blue LED lights up and the lock's motor whirs briefly.
5.
Repeat step 4 within 10 seconds to register more cards
6.
Exit programming mode with the # key or simply wait for 10
seconds until programming mode is exited automatically.
Note:
Cards that have already been registered are deleted from the
lock when presented in programming mode. This is confirmed by
the red LED lighting up.
Deleting all the user cards
1.
Hold the master card against the black RFID sensor.
2.
Turn the locking latch to the right to release the # key.
3.
Press the # key immediately once briefly. Please Wait. The blue
LED lights up continuously after 2 seconds.
4.
Press and hold the # key for 5 seconds. All the user cards are
deleted.
Red LED = card rejected
3
3
EN
DE
Publicidad
