viceroy VD-55 Manual De Instrucciones página 10

aDJUSTING ThE STOpwaTCh haND pOSITION
Before setting the time , check if the stopwatch 1/10 second , second and minute hands are
in the "0"(12 o'clock) position.
- If the stopwatch is in use , press the button in the following order to reset it, and then, check
if the hands return to "0" position. (For details, see "HOw TO USE THE STOPwATCH")
- If the stopwatch is counting:
- If the stopwatch is stopped:
- If the split time is displayed:
If either of the stopwatch hands are not in the "0" position , reset them following the
procedure below.
10
A B
B
B A
1) Pull out the crown.
CROWN
B