Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
or in a room where there is moisture or
exposure to water.
• If the chosen location does not have
a suitable support beam capable of
supporting 30Kg, install a 2"x4" support
between the roof beams as a support
medium.
• Make sure that the bracket for hanging
the fan to the ceiling or other suitable
structure is capable of supporting at
least 30Kg, with the two long fixing
screws included. Make sure that at
least 30 mm of the screw is screwed
into the bracket.
• Only the fans with a support rod or bar
can be installed on sloping roofs where
the angle of inclination does not exceed
25º. This model cannot be installed on
sloping roofs.
Our fans are not designed to be
installed in plasterboard or
false ceiling, as these materials
may not support 30kg.
Note: Fastening screws (included) are
designed for use with the fan and are
fastened to wooden beams or concrete
ceiling. If the installation is carried out on a
different material, it is advisable to use the
appropriate fixing screws for that material
(these screws are not supplied with this
equipment). ornillos no se suministran con
este equipo).
STEP BY STEP
Here at UniversalBlue we have
created videos to explain the
assembling process. You can
find them in our YouTube
channel, by clicking on the
following link, or scanning this QR code.
Select the model you have purchased from
the list..
Youtube link:
https://www.youtube.com/
playlist?list=PLWr7XjixBD4z5wryoYFEMFvDYKfkgIKlc
Or scan the QR code:
18
You can see the whole assembling
sequence in picture 05 on page 7.
Note: The images are for guidance only and
should be used to support the installation.
• Step 01: Fix the assembling support
supplied in a suitable place on the
ceiling or on the wall using the anchors
and screws included.
• Step 02: Disconnect the household
electric supply to prevent electroshock
• Step 03: Connect the cables of the
domestic circuit to the matching cables
from the fan
• Step 04: Fix the fan body to the support
anchored with the screws. Make sure
the cables are not pinched in any way.
• Step 05: Make sure all the screws are
properly tightened.
• Step 06: Connect the household power
supply again
• Step 07: The fan is ready to be used.
USING THE APPLIANCE
This device is very easy to use and does
not require much knowledge. However, we
advise you to familiarize yourself with the
instructions below.
The fan has 3 power levels that can be
selected through the remote control. It also
has a timer of up to 2 hours.
REMOTE CONTROL (see picture 05 on
page)
The device incorporates a remote control,
for a more comfortable and efficient use.
Publicidad
