GAGGLE Parade 4 Manual De Instrucciones página 5

PREPARATION PARADE
Carefully remove and lay out all hardware and parts. Check
quantities and match the parts list. Construct the Parade Buggy
on an even flat floor.
Note: During the assembly process whenever using nuts or bolts,
check each with the parts list by letter and size identification.
Place each nut or bolt on the diagram of the item which is
sketched actual size. Be sure to use the proper size specified in
the assembly directions. If any parts are missing, broken, or you
need assistance with assembly, DO NOT return your product to
the dealer. Please identify the Parade Buggy by the model
number identification label on the bottom of the frame when you
call or write to Gaggle. Make note of all identification numbers
and include this information with your request. DO NOT
Substitute Parts! Only replacement parts supplied or
recommended by the manufacturer or distributor shall be used.
1/2 in. wrench and 1/2 in. socket and matching ratchet wrench.
Hand tighten only:
Tighten fully with wrench:
AB20105_G6
SUGGESTED TOOLS
ASSEMBLY LEGEND
STEP 1
D
G
5
®
4 ASSEMBLY
E