Publicidad
Idiomas disponibles
Idiomas disponibles
Overview
Drill chuck
1.
Second handle
2.
3.
Switch for percussion drilling/drilling
Direction switch
4.
Locking button
5.
6.
Operating switch with speed regulator wheel
Drill chuck key
7.
General Safety Instructions for Electric Tools
This device is exclusively for private use! It is not fit for commercial use!
Warning: when working with electrical devices the following
prevention and safety Instructions are to be observed to
avoid fires, electric shocks and physical injuries:
For safe working:
Keep the working area in order!
●
Disorder in the working area can give rise to dangers of accidents! Pay attention to the ambient
●
conditions!
Do not leave electric tools under the rain!
●
Do not use these in humid or wet surroundings!
●
●
Make sure that there is enough light! Make sure that the working area is visible at a glance!
Do not use electric tools in areas subject to the risk of fires! Protect yourself against electric
●
shocks!
Avoid coming into contact with grounded parts (e.g. pipes, radiators, stoves, refrigerators)!
●
In case of extreme application conditions (e.g. high humidity, presence of metal particles, etc.) the
●
electrical safety of the device can be improved by connecting an isolation transformer or a fault
current circuit breaker!
Keep children away!
●
●
Do not let other people touch the tool or the cable!
Keep other people out of the working area! Make sure that the tool is stored safely!
●
Unused electric tools are to be kept in a dry, highflying or closed place, out of the reach of
●
children!
Do not overload the electric tool! It works better and safer within the indicated capacity range! Use
●
the right electric tool!
●
Do not use weak tools or adapters for heavy jobs. Do not use tools for purposes or jobs for which
these are not intended. For example, hand circular saws are not be used to cut trees or branches!
Always wear suitable working cloths!
Do not wear baggy cloths or jewellery! Risk of being caught by moving parts!
●
When working outside, it is advisable to wear rubber gloves and skid-proof shoes!
●
●
If you have long hair, wear a hairnet! Use protective goggles!
Always wear a breathing mask during jobs producing dust! Connect the vacuum system (if
●
available)!
●
If devices for the connection of vacuum and collection systems are available, make sure that
these are connected and used correctly!
Do not tamper with the cable!
●
●
Do not carry the tool by the cable and do not use it to pull the plug out of the socket!
Protect the cable against heat sources, oil and sharp edges! Secure the tool!
●
Use chucking devices or a vise to keep the tool still! The tool can thus be held in place more safely
●
3
1
2
- 01 -
5
4
6
7
Publicidad
