Publicidad
Idiomas disponibles
Idiomas disponibles
than by hand and the tool can be used with both hands!
●
Avoid unusual body postures! Always stand firmly in place and keep your balance! Always keep
the tool in good order!
●
Always keep tools sharp and clean to work correctly and safely!
●
Follow the maintenance and tool change instructions!
●
Check the plug and cable on a regular basis and have a qualified technician change these in case
of damage!
●
Check the extension cable on a regular basis and replace it if damaged!
●
Pull the plug out of the socket after use, before maintenance and when changing accessories
such as saw blades, drills cutters, etc.!
●
Do not leave protruding tool keys!
●
Make sure before turning on the tool that the key or setting gauge is removed!
●
Avoid the accidental starting of the tool!
●
Never carry an electric tool connected to the power mains with your finger on the switch!
●
Make sure that the switch is off when connecting to the mains! Extension cable outdoors: Use
only certified and duly marked extension cables outdoors!
●
Always be careful! Pay attention to your work! Proceed carefully. Do not use the tool if you are not
concentrated!
●
Check the tool for damages!
●
Before using the tool the next time check that the protection devices or slightly damaged parts are
in good working conditions! Check whether the moving parts function correctly, that these are not
jammed or whether any parts are damaged!
●
All the parts to be correctly mounted and meet all the requirements for the pro per functioning of
the electric tool!
●
Damaged protection devices and parts are to be repaired or changed by a qualified technician
provided that the operating instructions do not specify otherwise!
●
Damaged switches are to be replaced in a customer service shop! Do not use electric tools that
cannot be switched on or off!
WARNING!
●
For your own safety always use only the accessories and attachments specified in the operating
instructions or recommended or specified by the tool manufacturer!
●
The use of accessories and attachments other than those specified in the operating instructions
can cause injuries!
●
Always have your tool be repaired by certified technicians!
●
This tool meets the relevant safety requirements!
●
Repairs are to be carried out only by qualified technicians with original spare parts to avoid the
risk of injuries to the user caused by improper repairs!
●
During operating, wear hearing protection to avoid damage to your hearing!
Special Safety Information
When drilling or screwing into walls, ceilings etc make sure beforehand that you will not damage any
hidden electric cables. During this work you should not touch any metal parts of the machine. Only
touch the machine by the plastic housing.
Your machine is double insulated. This means that two completely independent types of insulation
prevent you from coming into contact with live metal parts. This measure represents a high degree
of protection against an electric shock.
Your Drill has the following Functions:
The operating switch (6) is used for all work carried out with the drilling machine. With the speed
selection via the regulator wheel you have optimum control of the machine.
- 02 -
Publicidad
