Publicidad
Idiomas disponibles
Idiomas disponibles
PARTS & ASSEMBLY
A. Base
B. Jar Pad
C. Container
48 oz., BPA-free copolyester
container.
D. Lid
Center part of the two-piece
lid is removable for adding
ingredients.
E. Blade
Stainless steel cutting blades.
F. Operating Light
Lighted LED indicates that
the unit is in standby mode.
LED will blink during operation.
G. Power Cord (not shown)
Control Panel Variations
TBB145 – Toggle Switch Controls with
HI, LO, OFF & PULSE
TBB160 – Electronic Touchpad Controls
with HI, LO, STOP, PULSE & 60-Second Timer
LED with Up
& Down
TBB175 – Variable Speed Control Dial & PULSE
PULSE Button Feature
PULSE overrides HI speed for a quick
burst of power.
All parts that come in contact with
food are BPA free.
16wi020112_tbb_ek_series_ib_final.indd 6-7
D
C
E
B
A
F
TBB145
F
TBB160
F
TBB175
6
BEFORE FIRST USE
After unpacking, follow the Cleaning and Sanitizing Instructions
on page 9 before rst use and if you have not used your blender
for a period of time. Thoroughly dry the container before placing it
on the base.
OPERATING INSTRUCTIONS
TBB145 – Toggle Switch Controls
1. With the blender unplugged
and in the OFF position, place
the container on the blender
base. Be sure container is
fully seated and that the drive
coupling is properly engaged.
2. Plug the power cord into an
outlet and the LED operating
light will illuminate.
3. Put ingredients into the container and place the lid on top.
Do not ll above MAX FILL line.
4. This blender has 2 speed settings: HI and LO. Switch toggle
switch to desired position. Always use HI or PULSE for
crushing ice.
5. When blending is complete, set toggle switch to OFF
position.
6. This blender is equipped with a PULSE option. Hold toggle
switch in down position to engage PULSE function. Unit will
run on MAX speed until the toggle switch is released.
NOTE: This blender utilizes a Slow Start
beginning HI or LO operation, the unit will start in a lower speed
for 1 second and then switch to the full selected speed. PULSE
utilizes a .5-second Slow Start
™
blending of ingredients in the container.
7. Allow motor to come to a complete stop before removing
container from blender base. Never place the container
on the motor base or remove it from the motor base while
motor is running.
8. Always hold container with one hand when starting and
while blending. Never operate without lid.
feature. When
™
. This allows for a more even
7
11/15/16 3:06 PM
Publicidad
