Miele SEB 236 Electro Premium Instrucciones De Manejo página 9

~
Do not let the vacuum cleaner or the
Electrobrush get wet. Clean only with a
dry cloth or slightly damp cloth when
disconnected from the mains supply. If
moisture gets into either the vacuum
cleaner or the Electrobrush, there is a
risk of electric shock.
~
The electro suction hose and the
electro telescopic tube contain
electrical wires. The plug connectors
must not come in contact with water.
They should only be cleaned with a dry
cloth.
Danger of electric shock.
~
Repairs should only be carried out
by a Miele authorised service
technician. Repairs and other work by
unqualified persons could be
dangerous. The manufacturer cannot
be held liable for unauthorised work.
Correct use
~
Never touch the roller brush while it
is rotating. Danger of injury.
~
Do not use the Electrobrush at head
level. Long hair, ties, scarves etc. could
be sucked in and become entangled in
the roller.
~
Keep the Electrobrush away from
curtains, clothing etc, as these could
be vacuumed in and become
entangled in the roller.
~
Do not vacuum up items which are
heavy, hard or have sharp edges. The
vacuum cleaner and Electrobrush can
become blocked and damaged.
All manuals and user guides at all-guides.com
en - Warning and Safety instructions
~
Do not vacuum anything which has
been burning or is still glowing, e.g. ci-
garettes, ashes or coal. The Electro-
brush and the vacuum cleaner might
catch fire.
~
Do not vacuum up any inflammable
or combustible liquids or gases and do
not vacuum in areas where such
substances are stored. Danger of
explosion.
~
Do not vacuum up any water, liquid
or damp dirt. These will cause major
faults and seriously impair the
functioning and electrical safety of the
vacuum cleaner and the Electrobrush.
Wait until any freshly cleaned or
shampooed carpets or floor coverings
are completely dry before attempting to
vacuum.
~
Do not vacuum toner dust. Toner,
such as that used in printers and
photocopiers, can conduct electricity.
The filtration system in the vacuum
cleaner may not filter it completely,
causing toner to be blown back into the
room by the fan.
Disposing of an old
Electrobrush
~
Make appropriate arrangements for
the safe disposal of your old
Electrobrush.
The manufacturer cannot be held
liable for damage caused by
non-compliance with these Warning
and Safety instructions.
9