Publicidad
Idiomas disponibles
Idiomas disponibles
4-5-2 Silent
The "Silent" function is used to send the "Silent" control signal to the indoor unit. The indoor
unit automatically optimizes the noise it generates when it is in the "Silent" state.
• Turn on/off the "Silent" function: press
" blinks), and press
function ("
button to turn off the function (see Figure 6.13).
Note:
• The "Silent" function will be cancelled and needed to be reset when the unit is manually
turned off.
• Once it has been running for 8 hours, the Silent icon "
unit will exit the "Silent" operating state.
• The "Silent" and "ECO" functions cannot be set at the same time.
4-5- 3 ECO
The "ECO" function is used to send the "ECO" control signal to the indoor unit. The indoor unit
will run in the energy saving mode when it is in the "ECO" state.
Blink
(Function) button to switch to the "Silent"
(Confirm) button to turn on the function or
Start
Off
Off
Figure 6.13
19
" will no longer light up, and the
(Cancel)
V.2
Publicidad
