Urmet sinthesi steel 1039/70 Manual De Instrucciones página 8

DESCRIPTION OF TERMINALS
}
SE+
Terminal pins of discharge electric lock with holding current for relay, if present
SE-
C Common lock relay contact
NC Normally closed lock relay contact
NO Normally open lock relay contact
}
V-
Auxiliary power terminals
V+
]
ILL Not used
]
PA Hall button terminals for operating lock relay
]
Door sensor terminals
SP
V5 Not used
V3 Not used
]
AD/ILA Not used
EXP Not used
LAN Ethernet connector for LAN RJ45
I2C DIGITAL
Not used
CONNECTOR
Refer to the instructions contained in the system manual for wiring, maximum distances and confi guration
operations.
Use Urmet RJ45 connector kit for connections (product on sale until stocks last).
CONNECTION TO BUTTON MODULE WITH EXPANSION UNIT
Ref. 1158/82 and Ref. 1158/84
Use the following connections to connect the IP video door phone to button modules with expansion unit
Ref. 1158/82 and Ref.1158/84:
A A
1158/84
B
C
1158/84
ILL
8
All manuals and user guides at all-guides.com
1158/84
B
1158/84
B
1158/84
B
A
B
1158/84
C
1158/82
B
1158/84
55 cm-long cable provided with the button module with
expansion unit Ref. 1158/82 and /84
20 cm-long cable provided with the button module with
expansion unit Ref. 1158/82 and /84
20 cm-long cable provided with the outdoor IP video
station
}
SE2
DS1039-053A