Metra 95-7015CHG Instrucciones De Instalación página 3

1. Attach the brackets to the radio housing
trim panel using the (4) #8 x 3/8" truss
head Phillips screws provided. (Figure A)
2. Slide the radio into the bracket/radio
housing assembly and secure to the
assembly using the screws supplied
with the radio. (Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or AXXESS. Re-connect the negative
battery terminal and test the radio for
proper operation.
4. Reassemble the dash in reverse order of
disassembly.
KIT ASSEMBLY
(Figure A) (Figure B)
REV. 2/8/23 INST95-7015CHG
3