Publicidad
Idiomas disponibles
Idiomas disponibles
HDMI HDBaseT + USB-B to A and RS232 over Cat Extender Single Gang Wall Plate
Transmitter to Box Receiver - 4K 60Hz
Upgrade Continued
Introduction of the "Firmware Updater":
1: Select the correct model:
•
Upgrade transmitter: select C2G31030-TX
Upgrade receiver: select C2G31030-RX
RS232:
•
Port: Select the correct COM Port number.
Baud rate: Select the correct baud rate, the correct
baud rate for upgrading TX is 115200, and
upgrading RX is 57600.
Connect: Click the button to connect with the
device.
FW version: Click "Check" button to check the
•
current FW version of the device after
successful connection.
Update File:
•
Click "Browse" to select the FW upgrade bin file
from the local PC.
Update:
•
Click the button to start upgrading FW after the bin
file is uploaded.
Log: Show the log of the operations on the
•
software and returning information of the device.
Clear: Click the button to clear up all the log in the white box.
•
2: The progress bar will show the upgrading process.
•
8
(us)
Publicidad
