Publicidad
Idiomas disponibles
Idiomas disponibles
HDMI HDBaseT + USB-B to A and RS232 over Cat Extender Single Gang Wall Plate
(us)
Transmitter to Box Receiver - 4K 60Hz
Upgrade
The transmitter/receiver supports firmware upgrading through RS232 port. Please contact your supplier to get the latest upgrade tool
"Legrand Product Firmware Updater".
Warning: Do not power off the device during upgrading process.
To upgrade MCU firmware of the device, perform the following:
1. Before upgrading the receiver, please set the DIP switch of the receiver to the position of "MCU".
2. Connect the transmitter/receiver to a PC using a USB Type-A to 3-pin phoenix connector cable.
3. Connect the power adapter provided to the receiver, and power on all the devices.
Note: If the transmitter isn't connected with the receiver, it needs to be connected to another power adapter (not included in the package).
4. Click to run the "Legrand Product Firmware Updater" software. The following window will appear on the next page:
7
Publicidad
