Publicidad
Idiomas disponibles
Idiomas disponibles
HDMI HDBaseT + USB-B to A and RS232 over Cat Extender Single Gang Wall Plate
Transmitter to Box Receiver - 4K 60Hz
Wiring
Warnings:
Before wiring, disconnect the power from all devices.
•
During wiring, connect and disconnect the cables gently.
•
Steps for device wiring:
1. Connect HDBT OUT port of the transmitter to HDBT IN port of
the receiver via a single Cat 5e/6/6a/7 cable.
2. Connect an HDMI source to the HDMI IN port of the
transmitter.
3. Connect an HDMI display to HDMI OUT port of the receiver.
4. Connect additional functions options.
USB pass-through: Connect USB host PC to HOST port of the
•
transmitter, and connect USB devices such as keyboard and
mouse to USB DEVICE ports of the receiver. The connected
USB devices can be connected to the host PC.
RS232 pass-through: Set both the DIP switches of the
•
transmitter and receiver to PASS-THROUGH position,
connect a RS232 enabled device such as a PC to RS232 port
of the transmitter and receiver respectively.
5. Connect the provided DC 12V power adapter to the receiver.
Note: With one-way PoH function supported, the transmitter can
be powered by the receiver, no additional power adapter is needed
to be connected to the transmitter.
6. Power on all attached devices.
5
(us)
Publicidad
