E031002B
non respect of European safety standards
during machine utilisation;
incorrect installation of the machine;
neglect
or
instructions included in this manual about
programmed maintenance
neglect
or
instructions included in this manual;
sudden drops of voltage of the feeding
systems;
unauthorised changes on the machine;
utilisation of the machine by unauthorised
operators.
4. UNPACKING
We recommend to check the machine when
delivered and report directly to the forwarder all
possible damages, either to external or internal
parts, occurred during transportation.
By handling the machine use a forklift with
forks as wide as possibile.
The machine must be completely unpacked near
the place of installation.
Straps must be cut and carton removed.
All packing materials must be properly recycled.
Open both side panel with the key provided and
remove the anchor bolt to the pallet which are
visibile at the bottom of the shoulder of the
machine.
To take the ironer off the pallet, slide the forks of
the lift under the slide (make sure you don't
scratch the varnish) and lift the machine.
To take the drying ironer off the pallet, use two
steel bars with a minimum diameter of 20 mm and
at least 800 mm long, introducing them through
incorrect
observance
incorrect
observance
the two preset holes. Sling the machine and lift it
in a perfectly vertical position.
of
of
Handling with a fork lift must be performed
only by qualified staff.
Do verify in technical sheet provided that
lifting machine is suitable to the weight of
the machine .
NOTE: inside the packaging (above the drying
ironer), there are two slides through which you
introduce and take out the linen. The slides must
be mounted in the preset housing on the frontal
part of the machine
5. IDENTIFICATION OF THE MACHINE
Machine can be identified by the plate with its
serial number, model, power and technical
characteristics. For spareparts and/or reparing
services you must have the exact serial number of
the model.
Tampering with, removal and absence of the
serial and identification number or anything that
13
10/03/06