MOB MO9149 Manual Del Usuario página 3

Connection to Bluetooth device
1. Follow the operating instructions of your Bluetooth device for pairing with the speaker. Normally this is done by going to the
"Bluetooth", "Set Up" or "Connect" menu and selecting the option to search for Bluetooth devices.
Slide the ② "ON/OFF" switch to the right to power on. When pairing, the blue light will blink, look for "MO9149" on
2.
your Bluetooth device and select this for pairing. When pairing is successful, the blue light will remain. Newer versions
may not need password and it will connect automatically illuminated. If connection fails, please try again according to
these instructions.
Playing Music
Short press ⑥ "Play/Pause/Phone" key to pause music or pause music to answer a call. A second short press will
1.
resume playing music again.
Short press ⑤ "Previous track/Vol-", the speaker will play the previous track. Long press the button to reduce speaker
2.
volume.
Short press ⑦ "Next track/Vol up", the speaker will play the next track.
3.
4. Long press the button to increase speaker volume and you will hear a prompt when maximum volume is reached.
Hands free phone call operation
When a phone call is incoming, the blue light remains on. Short press the ⑥ "Play/Pause/Phone" key to answer; long
1.
press the "Play/Pause/Phone" key to reject the call.
When on an active call, short press the ⑥ "Play/Pause/Phone" to hang up.
2.
Press ⑥ "Play/Pause/Phone" for double press, can switch the sounds between the mobile phone and speaker.
3.
Hands free phone call operation
When a phone call is incoming, the blue light remains on. Short press the ⑥ "Play/Pause/Phone" key to answer; long
1.
press the "Play/Pause/Phone" key to reject the call.
2. When on an active call, short press the ⑥ "Play/Pause/Phone" to hang up.
3. Press ⑥ "Play/Pause/Phone" for double press, can switch the sounds between the mobile phone and speaker.
Technical Specification
Bluetooth Version: 2.1+EDR
RF Range: 10m
Output power:
Stand-by time: about hours
Talking/Playing: about hours
Charging time: about hours
2.4 – 2.48 GHz
Bluetooth frequency:
Radiated Power: -3.52 dBm
Operation of power bank
Make sure the power bank is fully charged before use.
1. Charging electronic digital equipment:
Please choose the suitable connector according to your electronic digital products. When charging any devices, the
indicator light is blue. When the blue indicator is off that means the devices is fully charged.
Please unplug the charging wire after the digital product is fully charged.
Caution: The output power of the power bank is 5V/1A, please check input specification of your product before
charging with the power bank.
2. Charging power bank:
Connect the power bank with a DC USB port. Plug the micro USB end of the cable to
the power bank. When charging, the indicator light is red. When the red indicator is off that means the power bank is
fully charged.
All manuals and user guides at all-guides.com