Grohe 39972000 Manual De Instalación página 8

Time settings
Time
(factory setting 19:00)
Start time for lighting
(factory setting 19:00)
Lighting duration
(factory setting 3:00)
Flashing signals:
✂
Confirmation with
Indicator lamp L1
(*1): Confirmation "time programming is activated": 3 fast flashing signals (L1) then next with:
/ or button T2 (minutes selection)
(*2): If no further button is pressed within 30 s after the confirmation "time programming is activated", time setting mode is exited
without changing the time.
(*3): If button T3 (save) is not pressed within 30 s after selecting hours and/or minutes, time mode setting is exited without
changing the time.
(*4): Confirmation "setting has been saved": 3 fast flashing signals (L1), then: normal mode.
Daylight saving setting (summer/winter time)
• To put the time back 1 hour, press and hold buttons T1 and T2 simultaneously for more than 5 s.
• To put the time forward 1 hour, press and hold buttons T2 and T3 simultaneously for more than 5 s.
Restoring the factory setting
To restore the factory setting, press and hold buttons T1, T2 and T3 simultaneously for more than 5 s.
5
Start:
Button
(*1) / (*2)
1. Flashing signals:
T1
2. Flashing signals:
...
T2
24. Flashing signals:
1. Flashing signals:
...
T3
23. Flashing signals:
24. Flashing signals:
Press and hold button until the number of flashing
Press and hold button
for 5 s
Button T1:
✁
Hours selection
by flashing signals
✂
☎ 1. Flashing signals = 5 min
1:00 2. Flashing signals = 10 min
☎
2:00 ...
☎ 11. Flashing signals = 55 min
0:00 12. Flashing signals = 0 min
☎ 1 h
☎
23 h
☎ 0 h
signals corresponding the desired number of
hours and minutes.
Button T2:
✁
Minutes selection
by flashing signals
✂
button T1 (hours selection) and
Button T3:
✄
saving
✂
(*3) / (*4)
Hours and / or minutes
as selected with T1 / T2
after saving:
Normal mode