Publicidad
Idiomas disponibles
Idiomas disponibles
Installation of Base
Remove base cover from base (A) as shown in figure 1.1.
1
Hand tighten pole (C) onto base (A) as shown in figure 1.2. Tigthen set screw to secure pole using 3mm allen
wrench (K) as shown in rear view.
BASE COVER
A
Feed cables through base cover. Insert base cover
2
onto pole (C).
BASE COVER
C
All manuals and user guides at all-guidesbox.com
fig 1.1
SET SCREW
4 of 23
REAR VIEW
Insert lock collar (D) onto pole (C).
3
Adjust to desired height and tighten by hand.
ISSUED: 04-05-11 SHEET #: 090-9199-4 03-03-14
C
fig 1.2
D
C
Publicidad
