Publicidad
Idiomas disponibles
Idiomas disponibles
GB | Wireless Receiver
Designed for P5611OT wireless thermostat.
Important
• Before first use, make sure to read carefully the Operating Manual for the thermo-
stat, as well as the manual for the boiler or air-conditioning equipment.
• Turn off power before installing the thermostat!
• Installation should be carried out by a qualified professional!
• Abide by prescribed standards during installation.
• You can find more detailed instructions in the P5611OT thermostat's manual.
SPECIFICATIONS
Switched load: max. 230 V AC; 16 A for resistive load; 5 A for inductive load
Operating temperature: 0 °C to 40 °C
Storage temperature: -10 °C to 60 °C
Unit interconnection: via 868 MHz radio signal, max. 25 mW e.r.p.
Pairing capacity: max. 6 receivers
Power supply: switching unit (receiver) 230 V AC/50 Hz
Dimensions and weight: switching unit: 37 × 115 × 91 mm; 150 g
Control (Portable) Unit
(see Fig. 1)
1 – day of the week
2 – clock
3 – comfort mode
4 – economy mode
5 – manual control
6 – programme preset
7 – comfort/economy mode switch
8 – UP button
9 – change clock
10 – change programme
11 – wireless communication icon
Removing the Rear Cover of the Control Unit
(see Fig. 2)
1. Use a screwdriver to press and hold the inner lock.
2. Remove the front cover.
Switching Unit
(see Fig. 3)
1 – main switch
2 – pairing button
12 – set temperature
13 – frost indication
14 – operation status icon
15 – battery status indication
16 – current room temperature
17 – day profile
18 – DOWN button
19 – change temperature
20 – illuminate screen
21 – RESET
3 – LED indicators
4
Publicidad
