Publicidad
Idiomas disponibles
Idiomas disponibles
Question/Problem - Cause
Cause
The power tool does not switch on:
• No supply voltage;
• Worn out carbon brushes;
• Faulty ON/OFF switch;
• Faulty electric motor;
Reduced suction/blowing power;
• The supply voltage is too low;
• The suction/blowing tubes are clogged, or the
internal shredding fan is unclogged;
• The collection bag is full;
• The operating mode selection lever is not in the right
position;
The warranty for this product is in accordance with the law
in force from the date of purchase. You should, therefore,
keep your proof of purchase during this period. The
warranty covers any manufacturing defect in material or
operation, as well as parts and work needed for their
repairing.
Excluded from the warranty are the misuse of the product,
any repairs carried out by unauthorized individuals (outside
the service center of the brand VITO) as well as any damage
caused by the use of it.
Solution
• Check the power cord, plug, socket and circuit breaker;
• Replace the carbon brushes;
• Contact technical assistance;
• Contact technical assistance;
• Use a power supply compatible with the technical
specifications of the blower/vacuum;
• Unclog;
• Empty the collection bag;
• Adjust the position of the operating mode selection
lever;
We declare, under our sole responsibility, that the product
labelled BLOWER / VACUUM 3000W with code VIAS3000A
complies with the following standards or normative
documents: EN 60335-1:2012+A11, EN 50636-2-100:2014,
EN
62233:2008,
AfPS
1:2006+A1+A2, EN 55014-2:2015, EN 61000-3-2:2014, EN
61000-3-3:2013, as defined by:
2006/42/EC - The Machinery Directive
-
2014/30/EU
The Electromagnetic Compatibility Directive
2011/65/EU – RoHS Directive
2000/14/EC –
Measured sound power level: Lpa 96 dB(A)
Guaranteed sound power level: Lwa 105 dB(A)
S. João de Ver,
15th january 2020
Central Lobão S. A.
Technical manager
Hugo Santos
GS
2014:01,
EN
55014-
Publicidad
