Samsung HW-Q930B Manual Del Usuario página 25

Ocultar thumbs Ver también para HW-Q930B:

Idiomas disponibles

06 CONNECTING AN EXTERNAL DEVICE

Method 1. Connecting using an HDMI Cable (Capable of Dolby Atmos / DTS:X decoding

and playback)

Pre-connection Checklist

• If the Audio Output options include Secondary Audio, make sure Secondary Audio is set to Off.

• Make sure that the content supports Dolby Atmos® / DTS:X.

External Device

1. Use an HDMI cable to connect the HDMI OUT port on the external device and the HDMI port on the bottom of the Soundbar.

2. Use an HDMI cable to connect the HDMI IN port of the TV and the HDMI TO TV (eARC/ARC) port on the bottom of the Soundbar.

3. Turn on the Soundbar, TV, and the external device.

4. Press the

(Multi Function) /

"HDMI" mode.

5. The Soundbar display indicates that "HDMI" mode is currently selected and the Soundbar will start playing sounds.

• When you use Dolby Atmos® / DTS:X: If the input source is Dolby Atmos® / DTS:X, refer to "Output specifications for the different sound

effect modes" on page 11.

• When Dolby Atmos® is activated, "DOLBY ATMOS" appears in the front display.

• When DTS:X is activated, "DTS:X" appear in the front display.

• Configuring Dolby Atmos® / DTS:X on your BD player or other device

Open the audio output options on the settings menu of your BD player or other device and make sure that "No Encoding" is selected for

Bitstream. For example, on a Samsung BD Player, go to Home Menu → Sound → Digital Output and then select Bitstream (unprocessed).

Supported UHD Signals Specification (3840 x 2160p)

Frame rate (fps)

• Supported specification may vary depending on the connected external device or usage conditions.

Top of the Soundbar

(Source) button on the top of the Soundbar or the

Colour depth

Top of the Soundbar

<Q9**B / Q8**B>

DIGITAL AUDIO IN

Bottom of the Soundbar

(Source) button on the remote control to select