Publicidad
The wireless hammer drill is
useful to both boring orifices
with the impact mode as well as
screwing and unscrewing.
Double
tip
Battery
charger
Battery charge
1. Plug in the charger in a 127 V~power outlet. (Green
charging indicator light will turn on).
2. Insert the battery into the charger sliding it as shown in
the figure. The green light will turn off and the red light
should be on indicating the charge has initiated.
3. When the battery is completely charged, the green light
will be on and the red light will be off.
4. Disconnect the charger from the power once the
charge is completed.
Battery failures
• If the green light flashes it is a sign that the battery has a
delay caused by the heat; wait until the battery
temperature is in the proper range to be able to charge.
• The red light remains on exceeding the recommended
charging time or if the red and green light flash alternately
it is a sign that the battery is defective; you must replace it
or use a
6
ENGLISH
Keyless
chuck
Battery
level
indicator
LED
light
Rotation direction
button
and switch lock
Battery
indicator
connection
teeth
Authorized Service Center.
Parts
Torque
regulator
Switch
Battery
release
button
Charge
Battery
Preparation
2
Speed
selector
Handle
Belt clip
1
Publicidad
