Mebak Chic Manual De Usuario página 8

OPERATION INSTRUCTIONS
Step
1
According to your needs to choose a suitable massage head, rotate the massage head
firmly into the massage gun.
Step
2
• Turn on the device by pressing the Power Switch
• Shortly press the Speed Button
the " "again to enter the speed into a loop of 02-03-04-05-06-01. The corresponding
speed will be displayed on the left side of the screen.
Step
3
• During the operation, you could press the Power Switch
the device to "Stand-by (Speed 00)" status. Switch off the device after use by pressing
the Power Switch
• In consideration of your safety, the device will automatically turn off if there is no operation
within 3 minutes in the Stand-by status.
• When the Power Display pulsates, please stop using the device and charge the device.
When the display screen shows "00 00" or "E | 00", it means the battery has ran out and
the device needs to be charged in time.
CHARGING
•
Fully charge the device before first use. Please use the original charging cable and a 5V/
2A output adapter to charge the device.
•
When charging, the Power Display will pulsate to show the battery level and indicate the
charging status. When the Power Display stops pulsating and stays at 99, it indicates that
the battery is fully charged. To prolong the battery life, we recommend you to charge the
device when the Power Display shows "20".
•
The remaining battery volume will display in 99, 80, 60, 40, 20.
•
The average run-time is 2-3 hours depending on the speed level and pressure applied
during use. And the average charging time is about 4 hours. The charging time could be
prolonged if the current output of the adapter is lower than 2A.
•
Please be noticed that the device cannot work during charging.
•
Please fully charge the device if it will not be used for a long time.
Insert
once to turn the device to speed level 1. Touch
for about 2 seconds again.
for about 2 seconds.
at any speed level to set
6
Pull out