Descargar Imprimir esta página

FRICON THC Serie Manual De Uso Y Mantenimiento página 24

Publicidad

Idiomas disponibles

Idiomas disponibles

THC
1. Introduction
Our goal is to offer our customers with a wide range of high-quality equipment while
maintaining the premise of high efficiency and low consumption in order to meet the
diverse needs of customers operating in the Food Retail segment. When developing
this equipment, its environmental impact was taken into account, especially the R290
and R600a gases used. R290 and R600a refrigerants have a low potential on
destroying the ozone layer and a very low greenhouse effect potential.
In order to ensure the best quality of the product, during the manufacturing the
products are subjected to rigorous safety and operational tests, which attest to
reliability and control the safety required by national and international standards in
various areas; the standards that regulate the product's compliance can be consulted
under the point "THC Line Declaration of Conformity".
To reach the equipment's maximum performance we recommend that you read this
Instructions Manual carefully. It contains important instructions for installation,
operation and maintenance. If you need support, FRICON is at your disposal through
the various channels available.
2. Description of the Equipment
Fig. 10 - Example of a THC equipment.
Fig. 11 - Location of the characteristics
These devices were designed to operate between certain ambient temperatures,
depending on the climatic classes, that must not be exceeded!
The climatic class of your equipment is described on the rating plate.
English
1. Handle with lock
2. Lid
3. Baskets
4. Thermometer
5. Control panel
6. Drainage cover
Technical information on rating plate:
• Serial Number
• Designation and type of equipment
• Nominal current and electric power
• Nominal voltage and frequency
• Consumption
• Gross and net volume
• Climate classification*
• Refrigerant and quantity used
• Electrical diagram
• Other technical information.
22

Publicidad

loading