Use; Checking The Airbed And Product Contents; Inflating The Airbed - Easy Home 77260 Manual Del Usuario

Use

Use

Checking the airbed and product contents

NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a
sharp knife or other pointed object, you may quickly damage
the airbed.
− Be very careful when opening.
1. Take the airbed out of the packaging.
2. Check to make sure that the delivery is complete (see fig. A).
3. Check whether the airbed or the individual parts exhibit damage. If this is
the case, do not use the airbed. Contact the manufacturer at the service
address specified on the warranty card.

Inflating the airbed

Automatically inflating the airbed
NOTICE!
Risk of damage!
Handling the airbed improperly could damage the airbed.
− When inflating the airbed, always stay close to it.
1. Spread the airbed
2. Remove the cover cap
socket (see fig. B).
3. Turn the pump control
fig. C).
The air pump
4. As soon as the desired firmness has been reached, turn the pump control to
position "O".
5. Pull the power plug and store it behind the cover cap.
6. Repeat steps 1–5 as needed.
12
out in an open area.
1
7 and insert the power plug in a properly installed
4 clockwise to the "Inflate" position
2 will start inflating the airbed.
6 (see