Adjusting The Firmness Of The Airbed; Cleaning - Easy Home 77260 Manual Del Usuario

Cleaning

Adjusting the firmness of the airbed

The air in the airbed may expand or contract depending on the
ambient temperature and the load on the airbed. The firmness
of the airbed may also change as a result.
It is normal for new vinyl to expand. It is therefore possible
that the airbed initially loses some of its firmness and has to be
inflated in order to maintain the desired level of firmness. This is
a normal occurrence during the first days of use. The specified
dimensions are only of an approximate nature and may vary
depending on the temperature of the vinyl and air.
− Add air to increase the firmness of the airbed (see chapter "Inflating the
airbed").
− Let air escape to decrease the firmness of the airbed (see chapter "Deflating
the airbed").
Cleaning
WARNING!
Risk of electric shock!
Water that has penetrated the airbed may result in an electric
shock.
− Disconnect the power plug before cleaning.
NOTICE!
Risk of short circuit!
Water that has penetrated the airbed may cause a short circuit.
− Never submerge the airbed in water.
− Make sure that no water penetrates the airbed.
− Do not in any case wash the airbed in the washing
machine. It would be destroyed as a result.
14