Storage; Repair - Easy Home 77260 Manual Del Usuario

NOTICE!
Risk of damage!
Improper handling of the airbed may result in damage.
− Do not use any aggressive cleaners, brushes with metal or
nylon bristles or sharp or metallic cleaning utensils such as
knives, hard scrapers and the like. They could damage the
surfaces.
1. Disconnect the power plug before cleaning.
2. Wipe the airbed off with a damp cloth and, if necessary, a small amount of
soapy solution.
3. Then let the airbed dry completely.

Storage

1. All parts must be completely dry before storage.
2. Let the airbed completely deflate before storing it (see chapter "Deflating
the airbed").
3. Lay the airbed down flat with the sleeping surface up and gently fold it as
described in the folding instructions (see fig. E).
− Always store the airbed in a dry area.
− Protect the airbed from direct sunlight!
− Store the airbed so that it is not accessible to children, securely locked away
and at a storage temperature between 41 °F and 68 °F (+5 °C and +20 °C)
(room temperature).

Repair

− You can repair small holes in the sides or on the bottom of the airbed with
commercially-available repair patches (2 repair patches
with the airbed).
− If the top side of the airbed is damaged, you can repair it with commercially
available repair glue.
− When using repair patches or glue, follow the manufacturer's instructions.
− If you are unable to repair the damage, dispose of the airbed in accordance
with applicable regulations (see chapter "Disposal").
Storage
8 are included
15