Levo C Manual Del Usuario página 10

07
Routine Infusion Instructions
6. Press the
you plan to
(see instructions later in this guide). LĒVO will
automatically suggest a default time and
temperature for the
the time (up to 10 hours) and temperature (up to
200°F/93°C) settings, as needed, by pressing the +
and - buttons. Once you're happy with your settings,
press START.
Use our handy Time & Temperature Calculator on our
website for recommendations on suggested infusion
settings: levooil.com/calculator
Removing the Basin from the machine base will
automatically pause the cycle. The cycle will resume
once the basin is put back in place and
pressed.
Warming Up
Note that the time it takes LĒVO C to reach your set
temperature can vary depending on factors like
altitude, your cycle settings, and the type of
ingredients you're using. Allow a range of
approximately 15-30 minutes to reach your set cycle
temperature.
button to start your infusion. If
INFUSE
before infusing, do that rst
ACTIVATE
INFUSE
cycle. You can adjust
START
is