Publicidad
Idiomas disponibles
Idiomas disponibles
minimum clearance of 100 cm from any wall of the device. Keep the device away
from any hot surfaces. Always operate the device on a level, stable, clean, fireproof
and dry surface and out of the reach of children and persons of impaired mental,
sensory and intellectual functions. Place the device in such a way that the mains
plug can be reached at any time. Ensure that the power supply to the device
corresponds to that specified on the identification plate!
3.3. Working with the device
1. Before using for the first time, make sure that the overflow pipe is properly
seated on the connections (on the back of the device).
2. Open the cover of the water tank.
Pour clean, cool water into the tank.
The water level should be between the minimum and maximum level.
3. Connect the vacuum connection. The machine works with one, the other or both
connections connected.
Connect the hose on one side to the vacuum connection and on the other side
to the device in which you want to create a vacuum.
4. Connect the plug to a power outlet.
5. Make sure that the circulation switch is in the OFF position.
6. Set the ON/OFF switch to the ON position. The ON/OFF switch will illuminate.
The pressure gauge will indicate the appropriate amount of vacuum generated.
7. When finished, turn the ON/OFF switch to the OFF position.
All the lights will go out. Pour the water out of the tank and drain it.
CAUTION! If the device stops working during operation, replace the water
in the tank.
Pour the water out of the tank, clean the tank of any debris, then pour the
water back in.
Make sure that each time you fill the water tank, the water is clean and cool
Publicidad
