Publicidad
Idiomas disponibles
Idiomas disponibles
1. Quick installation
1) In case your BODEGA43 is not suitable for free standing, please don't use the quick
installation, but read the normal installation instructions.
2) If the handle is not installed yet, install the handle according to the following steps:
a. Move the door seal just enough to put the screws in the holes in order to install the
handle, do not remove the door seal completely.
b. Attach the door handle with the screws that came with your BODEGA43.
c.
Return the door seal to the original position
3) If your shelves are tied together with tape for transport, remove the tape.
4) The models B4328 and B43145 can be placed directly against the walls around, while the
front air vents remain free. Built-in models B4325, B4342 and B43100 can be placed directly
against the walls left and right, but they need space behind. Please look for built in
instructions the drawings at the very end of this manual.
5) Wait at least 2 hours after your BODEGA43 is delivered before using it, and 10 minutes
between a small move and re-starting.
6) Ensure yourself of the correct voltage of 220V-240V/50Hz before you connect your
BODEGA43 to the power supply.
7) If your BODEGA43 does not switch on automatically, use the
BODEGA43.
8) Adjust the temperature zones to the desired temperatures.
9) Now your BODEGA43 is ready and it is time to store your wines. Check chapter 8: Loading
and storing wine bottles, to find out how to store your wines to achieve optimal long-lasting
quality.
button to switch on your
3
Publicidad
