Publicidad
Idiomas disponibles
Idiomas disponibles
g. Built in drawings for all models you will find at the very end of this manual.
h. Check the plug and cable before connecting the power supply and ensure the correct voltage
of 220V-240V/50Hz.
i.
Adjust the temperature zones to the desired temperatures, which you can set from 5°C-
20°C. Some models have limitations in temperature range in upper and or lower zone.
j.
Now your BODEGA43 is ready and it is time to store your wines. Check chapter 8: Loading
and storing wine bottles to learn how to store your wines in order to achieve optimal long-
lasting quality.
k.
If the unit is unplugged, power is lost, or turned off, wait 3 to 5 minutes before restarting the
unit. The wine cellar will not start if you attempt to restart before this time delay.
6. Temperature settings
a. Your BODEGA43 works best at room temperature ranging from 16°C to 32°C (60°F - 90°F).
b. The temperature range inside your BODEGA43 is 5°C-20°C (41F - 68F).
c.
By pressing the temperature up and down buttons simultaneously for 5 seconds, the
temperature display mode changes between °C and °F.
7. The control panel explained
a. Model B4325:
Display window. Left temperature is for the upper zone, the right indicator is for the lower zone. The
upper zone can be set from 10 – 20°C, the lower zone can be set from 5 – 12°C. Please be aware that
the temperature difference between the two zones is at least two degrees. So, for instance, you can't
set both zones at 10°C
On/off switch, hold for 3 seconds
Buttons to set the temperature in upper and down zone
Push both buttons at the same time for switching between °C and °F
Switches the LED light inside your BODEGA43 on or off
7
Publicidad
