Descargar Imprimir esta página

BODEGA43 B4325 Manual Del Usuario página 6

Publicidad

Idiomas disponibles

Idiomas disponibles

5. Installing your BODEGA43
a. When you receive your BODEGA43, make sure that when you unpack it, there are no defects
in its external appearance (from shocks, deformation etc.).
b. The models B4325, B4342 and B43100 have a door that is bigger than the body. Do not
place your BODEGA43 directly on a hard surface when unpacking it, since the glass can
break. Please note that breakage of the glass is not covered by the warranty.
c.
Open the door and check all interior fittings. Also make sure that the supplied items such as
shelves, the control panel, etc. are complete.
d. Remove all of the protection and adhesive strips from the packaging around and inside your
BODEGA43.
e. If there is no problem after checking this, then carry your BODEGA43 to its final location and
while doing so, pay attention to the following:
i.
Do not tilt your BODEGA43 at an angle of more than 45 degrees when moving it. Wait
at least 2 hours after your BODEGA43 is delivered before using it, and 10 minutes
between a small move and re-starting.
ii.
Place your BODEGA43 away from heat sources and rooms with high humidity (laundry
room, bathroom, etc.).
iii.
The models B4328 and B43145 can be placed directly against the walls around, while
the front air vents remain free. Built-in models B4325, B4342 and B43100 can be
placed directly against the walls left and right, but they need space behind. Please find
the built in instructions in the drawings at the very end of this manual.
iv.
Your BODEGA43 should be installed in a suitable place where the compressor will not
be subject to physical contact.
v.
Place your BODEGA43 on a flat surface. The feet of the BODEGA43 can be used to
cover small differences in height.
vi.
When placing your BODEGA43, make sure that the power cord is not trapped or
damaged.
f.
Make sure that the ventilation area in your BODEGA43 is clear when you install it, otherwise it
reduces the capacity of cooling and heating. In case your BODEGA43 has a ventilation grill, it
can't be fully integrated behind a joinery door. The grill must remain free.
6

Publicidad

loading

Este manual también es adecuado para:

B4328B4342B43100B43145