myBlend myLEDmask Manual De Instrucciones página 25

The near-infrared wavelength (850 nm) is not within the visible spectrum.
The activity of the near-infrared LEDs therefore cannot be seen by the user.
Indicator LEDs on the control panel interface show the activity of the near-
infrared LEDs. Never look directly at the near-infrared LEDs when they are
emitting light and, more generally speaking, do not look directly at LEDs
when they are emitting light. Tests based on the NF IEC 62471 standard
revealed that infrared carries a low risk (Risk Group 0) with regard to injury
to the eye only.
The device must be used within a temperature range of 0° to 30° C.
Do not use the mask while it is charging. Disconnect the power supply cord
before using.
The device must only be used with the material provided.
The charger must be easy to unplug.
In the event of frequent use, the LED mask must be left unused for 30 minutes
after each facial and for one hour after being fully re-charged.
The charger must not be used in a humid atmosphere or near a source of
water
IR emitted from this device. Do not stare at the IR source
Contraindications
• Medications causing photosensitivity: The use of retinoids or other medications
causing photosensitivity is contraindicated for any phototherapy treatment. Certain
fragrances and essential oils may also be contraindicated. If case of doubt, consult a
dermatologist or specialist.
• Anti-inflammatory treatments: Reduce the benefits of LED therapy to zero.
• Pregnancy: The device is not to be used by pregnant women.
• Children: The device is not to be used by children.
RISK GROUP 0
CAUTION
Product classified to:
CEI/IEC 60601-2-57-2011
User Manual Version No. 800866-EN01
myLEDmask
User Manual
25