myBlend myLEDmask Manual De Instrucciones página 31

4.3. Operating features
• Power supply – Charger: MASCOT charger model number 2116. The use of any other
charger is strictly prohibited.
- Voltage: 100 to 240 volts, AC
- Frequency: 50-60Hz
- Intensity: 0.35 A
The charger is sensitive to electrostatic discharges. We recommend that you handle
the charger with caution and ensure it is equipotential. All conductor components
should be connected to earth.
• OPTICAL EMISSIONS DELIVERED
- Red LEDs = 630 nm
- Number of red LEDs on face: 122
- Number of red LEDs on neck: 22
• Précision des caractéristiques de fonctionnement
Explication des 3 programmes définis
Phototype
Programme 1
Phototype 1
Program 2
Phototype 2
Program 3
Phototype 3
5.0 PRODUCT TRANSPORT
Atmospheric conditions: 0°C ≤ 0 ≤ +45°C. The myLEDmask comes in a storage case
specially designed for safe transportation.
6.0 STORAGE
6.1 Storage
The device must be stored in a dry place with no direct sunlight. During storage,
humidity must be between 10% and 80% with no condensation, and the temperature
between 0°C and 35°C, with atmospheric pressure ranging from 70 kPa to 106 kPa.
Make sure your myLEDmask is stored in its case when not in use. This will
protect it from exposure to light and from potentially damaging impacts
or falls.
- Infrared LEDs = 850 nm
- Number of infrared LEDs on face: 122
- Number of infrared LEDs on neck: 22
Duration
autonomy
5 min 35
11 min 10
13 min 55
Battery Number of complete
programs
35 min
35 min
35 min
User Manual Version No. 800866-EN01
myLEDmask
User Manual
6
3
2
31